Maintenance method of packing machine for powder



packing machine for powder are widely used in the field of pharmaceutical production, as well as in the fields of food and daily chemicals. After we purchase the packing machine for powder, we need to maintain it so that we can extend its replacement. Next, the editor will explain to you the maintenance methods of the powder packaging machine.
One, lubrication
Regularly lubricate the gear joint points and bearing oil holes with the bearing housing and moving parts. After each shift, the reducer must not work without oil. When adding lubricating oil, be careful not to put the oil tank on top of the rotating belt to prevent premature aging of the belt and cause slipping, loss or damage.

Two, maintenance
Before using the powder packaging machine, check the screws of each part, and there should be no looseness, otherwise it will affect the normal rotation of the whole machine. The electrical part should pay attention to waterproof, moisture-proof, anti-corrosion and anti-rat work. In order to ensure the cleanliness of the electronic control box and terminal, and to prevent electrical failures, the two heat sealers should be in the open position after shutdown to prevent scalding of packaging materials.

Three, clean
It can ensure that the sealing line of the packaged product is clear, and the scattered materials can be cleaned up in time. This will facilitate the cleaning of machine parts, so it is better to clean the dust in the electronic control box frequently to prevent short circuit or poor contact.
Therefore, pay attention to daily maintenance during long-term use and operation. This will not only ensure the smooth progress of the packaging work, but also obtain a satisfactory packaging effect.