What to do if the light vibration of the vibratory feeder does not feed

What to do if the light vibration of the vibratory feeder does not feed

1. Too much feed If too much material is fed, the material will not be transported in time, it will accumulate in the machine base, the operation will not be smooth, and the material will not get stuck under the outlet.

Performance and structure of horizontal conveyor | output conveyor

Performance and structure of horizontal conveyor | output conveyor

The structure of the horizontal screw conveyor consists of a semi-circular material trough and a rotating shaft with spiral blades mounted on a bearing and rotating by means of a driving device. The material is loaded in

Automatic granule packing machine to change the oil

Automatic granule packing machine to change the oil

When adding lubricant to automatic granule packing machine, there are also detailed instructions to ensure correct operation:   1. When refueling automatic granule packing machine, don't let the oil spill out

Maintenance rules of automatic automatic granule packing machine

Maintenance rules of automatic automatic granule packing machine

Automatic granule packing machine after a period of continuous operation, it is also best to maintain, overhaul and maintain regularly. Therefore, the related maintenance procedures and methods give reasonable precaution

15 reasons for the deviation of the belt of the slat belt conveyor

15 reasons for the deviation of the belt of the slat belt conveyor

1. The belt deviation caused by the center of the nose, tail and middle frame is not in a straight line. This situation is usually caused by installation. Since the centers of these three are not in a straight line, the